Platoro Dam: Constructed 1949-19511954 - Dams - 71 pages |
From inside the book
Results 1-5 of 22
Page
... Crest length : 885 feet for main section ; 590 feet for dike section Crest width : 35 feet Crest elevation : 10,048.0 Volume : 909 , 884 cubic yards Slopes : Upstream , 2-1 / 2 to 1 to a 20 - foot berm at elevation 9965 , then 5 to 1 to ...
... Crest length : 885 feet for main section ; 590 feet for dike section Crest width : 35 feet Crest elevation : 10,048.0 Volume : 909 , 884 cubic yards Slopes : Upstream , 2-1 / 2 to 1 to a 20 - foot berm at elevation 9965 , then 5 to 1 to ...
Page
... Crest length : 885 feet for main section ; 590 feet for dike section Crest width : 35 feet Crest elevation : 10,048.0 Volume : 909 , 884 cubic yards Slopes : Upstream , 2-1 / 2 ? to 1 to a 20 - foot berm at elevation 9965 , then 5 to 1 ...
... Crest length : 885 feet for main section ; 590 feet for dike section Crest width : 35 feet Crest elevation : 10,048.0 Volume : 909 , 884 cubic yards Slopes : Upstream , 2-1 / 2 ? to 1 to a 20 - foot berm at elevation 9965 , then 5 to 1 ...
Page vii
... crest elevation of 10 , 034.0 feet , and has a capacity of 3,000 cubic feet per second with the reservoir surface at elevation 10 , 041.0 . The outlet works is on the right abutment . Progressing downstream , it consists of a trashrack ...
... crest elevation of 10 , 034.0 feet , and has a capacity of 3,000 cubic feet per second with the reservoir surface at elevation 10 , 041.0 . The outlet works is on the right abutment . Progressing downstream , it consists of a trashrack ...
Page 3
... 1950. Preliminary investigations of a reconnaissance nature located 11 possible sources of embankment material ( fig . 19 ) . These areas , located from 2-1 / 2 miles upstream to TALUS FAULT NO . IT CREST OF DAM EL . 3.
... 1950. Preliminary investigations of a reconnaissance nature located 11 possible sources of embankment material ( fig . 19 ) . These areas , located from 2-1 / 2 miles upstream to TALUS FAULT NO . IT CREST OF DAM EL . 3.
Page 4
... CREST OF DAM EL . 10,048.0f -10,100 10,075 2 miles downstream of the dam axis , were originally. 10,000 . adt bike MELE01 fo 9,975 9,975 9975 TALUS To slay ad 9,950 -9,925 SPILLWAY CONEJOS ------- བ ། INLET CHANNEL 29 JJOTO 0'017 40,025 ...
... CREST OF DAM EL . 10,048.0f -10,100 10,075 2 miles downstream of the dam axis , were originally. 10,000 . adt bike MELE01 fo 9,975 9,975 9975 TALUS To slay ad 9,950 -9,925 SPILLWAY CONEJOS ------- བ ། INLET CHANNEL 29 JJOTO 0'017 40,025 ...
Common terms and phrases
48-inch butterfly valves acre-feet andesite axis Bolt bulldozed butterfly valves cofferdam completed Concrete grout conduit Conejos River contract cost cubic feet cubic yards cutoff trench dam and dike dam embankment dam foundation dike section discharge drain emergency gate end-dump trucks engineer equipment excavation fault fault gouge feet per second Figure fill zone flange flow fractured gate chamber Government camp grout cap Grout holes haul impervious material inches installation joints July Aug Sept June 21 laboratory leaf-Class left abutment load located main dam maximum Metal metalwork mixer moisture Order for changes outlet pipe outlet tunnel PARTIAL RUNOFF percent placed placement plates Platoro Dam pounds per square pumpcrete machine right abutment Rio Grande Compact RIO GRANDE COUNTY riprap ROCK BORROW AREA rockfill SAN LUIS VALLEY separation plant SLIDE ROCK BORROW specifications spillway bridge support rings talus tests trashrack structure unit valve house zone 1 material
Popular passages
Page 18 - ... PARTS 151. Character of Structure.— The structure is to be of the skeleton, curtain-beam type, resting on I-beam footings or grillages. The building is to be (18) stories high, with a basement story and a (flat) (mansard) (pointed) (hipped) roof. 152. Floor Loading.— The floors are to be calculated for a live load of (100) pounds per square foot, and a dead load of (50) pounds per square foot. The roof is to be calculated for a live load of (50) pounds per square foot, and a dead load of...
Page 22 - Specifications for Low and Intermediate Tensile Strength Carbon-Steel Plates of Flange and Firebox Qualities (Plates 2 in. and Under in Thickness) (ASTM Designation: A 285),' or Tentative Specifications for Low and Intermediate Tensile Strength Carbon-Steel Plates of Structural Quality (Plates 2 in.
Page 22 - Standard Specifications for FORGED- OR ROLLED-STEEL PIPE FLANGES, FORGED FITTINGS, AND VALVES AND PARTS FOR HIGH-TEMPERATURE SERVICE...