Trenton Dam: Constructed 1949-1953 |
From inside the book
Results 1-5 of 18
Page
... length about 6 , 760 feet Auxiliary cutoff trench : 50 - foot base width with 1-1 / 2 to 1 side slopes , length about 570 feet Spillway Type : Concrete overflow chute type with stilling basin Crest length of overflow section : 126 feet ...
... length about 6 , 760 feet Auxiliary cutoff trench : 50 - foot base width with 1-1 / 2 to 1 side slopes , length about 570 feet Spillway Type : Concrete overflow chute type with stilling basin Crest length of overflow section : 126 feet ...
Page 11
... length of 62 miles . The railroad company provided data and assisted in the selection of the route . Some of the studies for the relocation work included : ( 1 ) Cost estimates for raising the railroad grade to the crest elevation of ...
... length of 62 miles . The railroad company provided data and assisted in the selection of the route . Some of the studies for the relocation work included : ( 1 ) Cost estimates for raising the railroad grade to the crest elevation of ...
Page 14
... Lengths of culverts were estimated by using standard fill sections at structure sites , and bridge lengths were estimated from profiles . Unit costs were then applied to excavation , structures , and other items . ( c ) County Road ...
... Lengths of culverts were estimated by using standard fill sections at structure sites , and bridge lengths were estimated from profiles . Unit costs were then applied to excavation , structures , and other items . ( c ) County Road ...
Page 17
... length of the spillway , the type of spillway , and the method of operation of the spillway gates together with the resulting height of dam were compared on the basis of the total cost of the dam . The location of the spillway with ...
... length of the spillway , the type of spillway , and the method of operation of the spillway gates together with the resulting height of dam were compared on the basis of the total cost of the dam . The location of the spillway with ...
Page 22
... length ( fig . 8 ) . It has a maximum base width of 780 feet , a crest elevation of 2793.0 , and a crest roadway 30 feet wide . A 1,100 - foot - long spillway structure having a maximum discharge capacity of 126,500 second - feet ...
... length ( fig . 8 ) . It has a maximum base width of 780 feet , a crest elevation of 2793.0 , and a crest roadway 30 feet wide . A 1,100 - foot - long spillway structure having a maximum discharge capacity of 126,500 second - feet ...
Other editions - View all
Common terms and phrases
abutment acre-feet aggregate backfill Berm blanket blockouts Brass Cap BUREAU OF RECLAMATION camber canal outlet cement centerline chute coarse concrete construction Contraction joint contractor control house crushed rock cubic yards cutoff trench dam embankment dam foundation designed discharge eleva emergency gate chamber Figure Float flood control gravel grout high-pressure gates Highway bridge Hitchcock County holes horizontal hydraulic hydrostatic head inlet intake structure layer Limits of special loads located loess material maximum metal Nebr north borrow operation pier Pierre shale piezometer Pipe handrail pounds per square pozzolan PROJ pump radial gate railroad reinforcement relocation Republican River reservoir water surface riprap River outlet Rolled embankment SCALE OF FEET second-feet Settlement point Shale surface SILT silty slope south borrow area special compaction specifications spillway structure steel stilling basin storage Sump Sump pump surface at elevation tests Trenton Dam upstream valve vertical walls water surface elevation
Popular passages
Page 51 - Design, Construction, Inspection and Repair of Unfired Pressure Vessels for Petroleum Liquids and Gases.
Page 99 - yd. cu. yd. lin. ft. lin. ft. lin. ft. Labor and materials by contractor Unit cost
Page 94 - yd. cu. yd. cu. yd. cu. yd. Labor and materials by contractor Unit cost
Page 96 - ft. lin. ft. lin. ft. lin. ft. Labor and materials by contractor Unit cost
Page 100 - cu. yd. Lump sum Lump sum Labor and materials by contractor Unit cost 2.00
Page 99 - 88 89 90 91 92 93 94 Property and pay item description Installing metal pipe, fittings, and valves less than 6 inches in diameter Installing metal pipe, fittings, and valves 6 inches
Page 25 - above the maximum water surface, to prevent the dam from being overtopped by waves. Factors influencing wave height and wave ride-up, including maximum wind velocity, direction and duration, offshore reservoir
Page 98 - ft. Ib. Ib. Ib. Ib. Ib. Ib. Ib. Labor and materials by contractor Unit cost