Fig. 30 Par. 1.14 HOLD SIZES, SPOT FACES, WRENCHES, MINIMUM HOLE SIZES-SPOT FACES-WRENCHES-MINIMUM CENTERS FOR HEX. BOLTS Minimum thread length is measured from the extreme end of the bolt to the last complete thread. The length of the bolt is measured from the under surface of the head to the end of the bolt. Bolts too short for minimum thread lengths are threaded to within 4" of head on sizes to THREAD LENGTH: Machine screws are threaded as close to head as possible for lengths up to 14. Lengths over 14 have 14 minimum thread. 28 7 5 32 ᄒ 3 16 9 7 32 은 13/2 16 32 16 9 5 8 64 ᄒ 16 13/2 7 16 THREAD LENGTH: Cap screws are threaded 2D plus. Lengths shorter than 20 FINISH: Cap screw heads are machined on all surfaces. F. Length: NOTES Std. lengths are in: "increments to "; " increments 1" to 4" G. Length of full depth thread: I. N.C.- 2 Dia. +2" where thread length would be greater than length where thread length would be greater than " 2. N.F.12 Dia. +" where thread length would be greater than length where thread length would be greater than 11⁄2 Dia. + ". 3. Screws too short for above rules are threaded as close to H. Nominal Chamfer 35° extending to root of thread. FORMERLY X-D-3108 106-D-225 |