ProceedingsIEEE Computer Society Press - Computer integrated manufacturing systems |
From inside the book
Results 1-3 of 62
Page 237
3 Modeling of a Tolerance-Chain 3.1 Geometric Functional Requirement
Geometric variation of contact surfaces induce a displacement of some functional
surfaces of the assembly. This displacement must be limited and controlled in
order to ...
3 Modeling of a Tolerance-Chain 3.1 Geometric Functional Requirement
Geometric variation of contact surfaces induce a displacement of some functional
surfaces of the assembly. This displacement must be limited and controlled in
order to ...
Page 239
The approach ensuring the generation of the subassembly relative to a GFR is
applied to four GFRs (geometric conditions) C2, C3, C5 and C6. The generated
subassemblies including the key parts are presented in figure 12.
The approach ensuring the generation of the subassembly relative to a GFR is
applied to four GFRs (geometric conditions) C2, C3, C5 and C6. The generated
subassemblies including the key parts are presented in figure 12.
Page 246
the geometrical behaviour of the mechanism, and specification hull that limits the
deviations of parts. The quantifier conditions the determination of the modifier (
Maximum Material Condition or Least Material Condition). Moreover, this ...
the geometrical behaviour of the mechanism, and specification hull that limits the
deviations of parts. The quantifier conditions the determination of the modifier (
Maximum Material Condition or Least Material Condition). Moreover, this ...
What people are saying - Write a review
We haven't found any reviews in the usual places.
Contents
Microassembly Microfactory | 1 |
Microassembly and Microfactory | 2 |
Process Planning | 24 |
Copyright | |
7 other sections not shown
Other editions - View all
Common terms and phrases
actuator applied approach Assembly and Task assembly model assembly operation assembly planning assembly process assembly sequence assembly system assembly tasks axis B-spline batch blocks C-space cell cleanroom components computation configuration configuration space considered contact angle cost cycle defined deflexions developed device disassembly sequence duo-bi environment equation equipment evaluation Figure flexible genetic algorithm geometric gripper HACCP haptic heuristic holons hypergraph IEEE International Symposium industrial industrial robot integrated interface linear manipulation mechanism metaheuristic method micro micro-motor microfactory motion node obtained optical tweezers optimal paper parameters path planning performance Petri nets piezoelectric placement position precedence graphs problem Proc proposed PVDF representation represented Robotics and Automation rotation scheduling sensor simulation solution space sub tour sub-bins subassemblies surface Symposium on Assembly Task Planning Besancon Technology tion tolerancing torque trajectory transition virtual voxels workstation
Bibliographic information
| Title | Proceedings |
| Author | IEEE International Symposium on Assembly and Task Planning |
| Contributors | IEEE Robotics and Automation Society, IEEE Xplore (Online service) |
| Publisher | IEEE Computer Society Press |
| Original from | the University of Michigan |
| Digitized | 11 Jan 2008 |
| Export Citation | BiBTeX EndNote RefMan |