ProceedingsIEEE Computer Society Press - Computer integrated manufacturing systems |
From inside the book
Results 1-3 of 64
Page 28
first Kz. If the part is not in Kx, then it has no constraints in the x direction and it is
considered as an Alignment (in this case, no guarded motion can be performed
in the x direction to fix the part in its final position). If the part is exclusively in one
...
first Kz. If the part is not in Kx, then it has no constraints in the x direction and it is
considered as an Alignment (in this case, no guarded motion can be performed
in the x direction to fix the part in its final position). If the part is exclusively in one
...
Page 141
In the classic JSSP several constraints on jobs and machines are considered:
machines are always available and never break down; there are no precedence
constraints among operations of the different jobs; the operations processing can
...
In the classic JSSP several constraints on jobs and machines are considered:
machines are always available and never break down; there are no precedence
constraints among operations of the different jobs; the operations processing can
...
Page 159
It obliges to disassemble subassemblies associated to some places because
they contain at least one component destined to disposal or because there is no
recycling network for the considered subassemblies. In addition, this constraint
can ...
It obliges to disassemble subassemblies associated to some places because
they contain at least one component destined to disposal or because there is no
recycling network for the considered subassemblies. In addition, this constraint
can ...
What people are saying - Write a review
We haven't found any reviews in the usual places.
Contents
Microassembly Microfactory | 1 |
Microassembly and Microfactory | 2 |
Process Planning | 24 |
Copyright | |
7 other sections not shown
Other editions - View all
Common terms and phrases
actuator applied approach Assembly and Task assembly model assembly operation assembly planning assembly process assembly sequence assembly system assembly tasks axis B-spline batch blocks C-space cell cleanroom components computation configuration configuration space considered contact angle cost cycle defined deflexions developed device disassembly sequence duo-bi environment equation equipment evaluation Figure flexible genetic algorithm geometric gripper HACCP haptic heuristic holons hypergraph IEEE International Symposium industrial industrial robot integrated interface linear manipulation mechanism metaheuristic method micro micro-motor microfactory motion node obtained optical tweezers optimal paper parameters path planning performance Petri nets piezoelectric placement position precedence graphs problem Proc proposed PVDF representation represented Robotics and Automation rotation scheduling sensor simulation solution space sub tour sub-bins subassemblies surface Symposium on Assembly Task Planning Besancon Technology tion tolerancing torque trajectory transition virtual voxels workstation
Bibliographic information
| Title | Proceedings |
| Author | IEEE International Symposium on Assembly and Task Planning |
| Contributors | IEEE Robotics and Automation Society, IEEE Xplore (Online service) |
| Publisher | IEEE Computer Society Press |
| Original from | the University of Michigan |
| Digitized | 11 Jan 2008 |
| Export Citation | BiBTeX EndNote RefMan |