GB/T 18287-2013 Translated English of Chinese Standard. (GBT 18287-2013, GB/T18287-2013, GBT18287-2013): General specification of lithium-ion cells and batteries for mobile phoneThis Standard specifies the terms and definitions, requirements, test methods, quality assessment and marking, packaging, transportation and storage of lithium-ion cells and batteries used for mobile phones. This Standard is applicable to lithium-ion cells and battery packs (hereinafter referred to as batteries) used for mobile phones. Other lithium-ion cells and batteries for mobile communication terminal products may implement this Standard as reference. |
Common terms and phrases
acceptance inspection accordance with requirements Accuracy of instruments ambient temperature Appearance and Dimensions battery is charged battery is tested battery pack battery shall meet battery with rated capability and recovery cell or battery cells and batteries Chapter and Section Charge retention capability constant voltage current of 0.2 cut-off voltage discharge test Electrostatic Discharge environmental temperature fire or explosion following tests Free fall GB/T High temperature discharge Inspection items Required internal resistance leakage Limited charge voltage lithium-ion cells Low temperature discharge manufacturer Mechanical shock 4.5.6 meet the requirements minimum package mobile phone Molded shell stress nominal voltage open-circuit voltage Overcharge protection Overdischarge protection peak acceleration requirements of Clause rupture Safety performance Safety protection performance Short circuit Short-circuit protection shorter than 5h Standard Steady damp-heat steel column stress under high Temperature Cycling 4.5.7 temperature discharge 4.2.4 temperature of 23°C±2°C tested in accordance thermocouple till the cut-off Type inspection venting Vibration